Store for professionals (EU countries)
Give us a call: +49 (0) 7032-895 93 - 0

Electronic load | Basic unit, 2 modules

Electronic load | Basic unit, 2 modules
€914.00 *
Content: 1 piece(s)

Prices plus VAT plus shipping costs

The article is available.

  • GW-PEL-2002A
Available downloads:
GW Instek GW-PEL-2002A Electronic load / current sink Programmable, base unit with controller, 2... more
Product information "Electronic load | Basic unit, 2 modules"

GW Instek GW-PEL-2002A
Electronic load / current sink
Programmable, base unit with controller, 2 slots, modular design

Properties of the basic unit of the electronic load PEL-2002A

  • Sequence function for highly efficient load simulations
  • Flexible configuration with mainframes and plug-in modules
  • Multiple independent load inputs with up to 8 channels in one mainframe
  • Parallel connection of inputs for increased load capacity
  • Parallel connection of inputs for static and dynamic tests
  • Multiple channels run under one clock control for dynamic tests
  • Maximum power rating for low range, high resolution CC tests
  • From setting and From on/off for From tests at start-up
  • Program mode for creating working routines for repetitive tests
  • OPP/OCP/OVP/OTP protection functions
  • External channel control/monitoring via an analogue control port
  • Multi-interface USB device/host, RS-232C and GPIB (optional)
  • Multi-mainframe connection with up to 5 mainframes in one system

The PEL-2002/2004 mainframe for power sinks

The PEL-2004 and PEL-2002 are multi-channel, programmable electronic DC loads with a modular design. The PEL-2000 series is designed to meet the ongoing shift towards high-speed operation in today's semiconductor market. As the power supplies, DC-DC converters and batteries that drive semiconductor circuits follow this trend, power supply design, quality testing and characteristic certification using high-speed loads have become necessary. The PEL-2000 series includes two types of mainframes and 4 types of load modules to flexibly meet users' requirements. Any load module combination can be used with a mainframe to customise a test system based on the number of channels and the maximum load power, voltage and amperage of each channel. Multiple loads can be connected in parallel to provide a higher power load for testing higher power outputs. This flexibility significantly reduces the investment required for future projects with different power requirements. The PEL-2004 is a mainframe with four slots and a main control unit for four load modules, whereas the PEL-2002 is a mainframe with two slots and a main control unit for two load modules. When the PEL-2004 is configured with 4 load modules of 350 W each, the PEL-2000 series can accommodate up to 1.4 kVA of power.

For higher load capacities, the mainframes can be connected in parallel using standard 20-pin MIL connectors. A maximum of 5 mainframes, including a master and 4 slaves, can be daisy-chained together to achieve a total load capacity of 7kW for high current and high power applications. With 4 dual-channel load modules, the PEL-2004 can handle 8 power supply outputs simultaneously. The sequence function allows each channel to change its load sink according to a predefined sequence at a rate of up to 100 s per step. Each sequence can run simultaneously under the control of a clock. This is one of the most powerful features of the PEL-2000 series, as it is able to realistically simulate a power supply load with multiple outputs. In dynamic mode, the load current or load resistance pulses between two preset values at a predefined rate of up to 25 s per step. This is often used as a standard test method to check the response of a power supply to rapid load changes. Most notably, multiple load channels can be connected in parallel to perform dynamic tests synchronously with a single clock. This Parallel Dynamic functionality provides the flexibility to run dynamic tests for a high power power supply without the need for another high power load.

Optional accessories of the basic unit PEL-2002A

  • PEL-001: GPIB card
  • PEL-002: PEL-2000A Series Rack Mount Kit
  • PEL-003: Control Panel Cover
  • PEL-016: LAN card
  • GTL-251: GPIB-USB-HS (High Speed)
  • GTL-248: GPIB cable (2m)
  • GTL-249: Frame Link Cable
  • GTL-246: USB cable, USB 2.0 A-B TYPE CABLE, 4P
  • GTL-232: RS-232C cable, 9-pin, type F-F, null modem, 2 m

Scope of delivery of the basic unit PEL-2002A

  • Base unit
  • User manual
  • PEL-003: Control panel cover 1x
  • Power cord
Related links to "Electronic load | Basic unit, 2 modules"
Electronic load | DC, 300 W, 500 V, 15 A Electronic load | DC, 300 W, 500 V, 15 A
GW Instek (Good Will Instruments)
GW-PEL-3032E

Content 1 piece(s)
€1,363.00 *
Safety Analyser | 500 VA AC Safety Analyser | 500 VA AC
GW Instek (Good Will Instruments)
GW-GPT-15001

€2,285.00 *
Multifunction HV Tester | H or X Status Multifunction HV Tester | H or X Status
GW Instek (Good Will Instruments)
GW-GPT-9503

€1,809.00 *
Spectrum Analyser | 9 kHz / 1.8 GHz Spectrum Analyser | 9 kHz / 1.8 GHz
GW Instek (Good Will Instruments)
GW-GSP-818

Content 1 piece(s)
€1,150.00 *
Spectrum Analyser | 9 kHz / 3.25 GHz Spectrum Analyser | 9 kHz / 3.25 GHz
GW Instek (Good Will Instruments)
GW-GSP-9330

Content 1 piece(s)
€4,999.00 *
Spectrum Analyser | 9 kHz / 3 GHz Spectrum Analyser | 9 kHz / 3 GHz
GW Instek (Good Will Instruments)
GW-GSP-9300B

Content 1 piece(s)
€2,999.00 *
Accessories | USB Power Sensor Accessories | USB Power Sensor
GW Instek (Good Will Instruments)
GW-PWS-06

Content 1 piece(s)
€2,763.00 *
Leakage current tester | AC, DC, AC + DC Leakage current tester | AC, DC, AC + DC
GW Instek (Good Will Instruments)
GW-GLC-9000

Content 1 piece(s)
€2,192.00 *
Electronic load | DC, 175 W, 150 V, 35 A Electronic load | DC, 175 W, 150 V, 35 A
GW Instek (Good Will Instruments)
GW-PEL-3021

Content 1 piece(s)
€1,609.00 *
Electronic load | Plug-in Module, 3 Channel Electronic load | Plug-in Module, 3 Channel
GW Instek (Good Will Instruments)
GW-PEL-2030A

Content 1 piece(s)
€1,793.00 *
Electronic load | Plug-in Module, 2 Channel Electronic load | Plug-in Module, 2 Channel
GW Instek (Good Will Instruments)
GW-PEL-2020A

Content 1 piece(s)
€1,543.00 *
Electronic load | DC, 300 W, 150 V, 60 A Electronic load | DC, 300 W, 150 V, 60 A
GW Instek (Good Will Instruments)
GW-PEL-3031E

Content 1 piece(s)
€1,250.00 *
Spectrum Analyser | 150 kHz / 3 GHz Spectrum Analyser | 150 kHz / 3 GHz
GW Instek (Good Will Instruments)
GW-GSP-730

Content 1 piece(s)
€812.00 *
RF & Spectrum Analyser | Training System RF & Spectrum Analyser | Training System
GW Instek (Good Will Instruments)
GW-GRF-1300A

Content 1 piece(s)
€507.00 *
RF Signal Generator | 100 MHz ~ 300 MHz RF Signal Generator | 100 MHz ~ 300 MHz
GW Instek (Good Will Instruments)
GW-USG-0103

Content 1 piece(s)
€428.00 *
Hand LCR-Meter | 4 1/2 Digits, 100 kHz Hand LCR-Meter | 4 1/2 Digits, 100 kHz
GW Instek (Good Will Instruments)
GW-LCR-916

Content 1 piece(s)
€334.00 *
Accessories | Return Loss Bridge Accessories | Return Loss Bridge
GW Instek (Good Will Instruments)
GW-RLB-001

Content 1 piece(s)
€311.00 *
Cable set | for LCR-81xx & 821: 4 wire - DC Cable set | for LCR-81xx & 821: 4 wire - DC
GW Instek (Good Will Instruments)
GW-LCR-12

Content 1 piece(s)
€283.00 *
Hand LCR-Meter | 4 1/2 digits, 10 kHz Hand LCR-Meter | 4 1/2 digits, 10 kHz
GW Instek (Good Will Instruments)
GW-LCR-915

Content 1 piece(s)
€248.00 *
Cable set | for LCR-81xx & 821: micro probes Cable set | for LCR-81xx & 821: micro probes
GW Instek (Good Will Instruments)
GW-LCR-08

Content 1 piece(s)
€184.00 *
SMD test adapter | 4-wire SMD test adapter | 4-wire
GW Instek (Good Will Instruments)
GW-LCR-15

Content 1 piece(s)
€183.00 *
Accessories | Soft Carrying Case Accessories | Soft Carrying Case
GW Instek (Good Will Instruments)
GW-GSC-001

Content 1 piece(s)
€174.00 *
Accessories | 19" Rackmount Adapter Accessories | 19" Rackmount Adapter
GW Instek (Good Will Instruments)
GW-GRA-404

Content 1 piece(s)
€173.00 *
Test adapter | for LCR-81xx & 821: axial/radial Test adapter | for LCR-81xx & 821: axial/radial
GW Instek (Good Will Instruments)
GW-LCR-05

Content 1 piece(s)
€146.00 *
Cable set | for LCR-81xx & 821: 4 wire - DC Cable set | for LCR-81xx & 821: 4 wire - DC
GW Instek (Good Will Instruments)
GW-LCR-06B

Content 1 piece(s)
€102.00 *
Cable set | for LCR-81xx & 821: alligator clips Cable set | for LCR-81xx & 821: alligator clips
GW Instek (Good Will Instruments)
GW-LCR-07

Content 1 piece(s)
€73.00 *
Oscilloscope Accessories | Probe, 70 MHz Oscilloscope Accessories | Probe, 70 MHz
GW Instek (Good Will Instruments)
GW-GTP-070B-4

Content 1 piece(s)
€21.00 *
Programmable High-Precision DC Power Supply | 10 V, 5 A, 50 W Programmable High-Precision DC Power Supply |...
GW Instek (Good Will Instruments)
GW-PPX-1005

Content 1 piece(s)
€810.00 *
High-Frequency LCR Meter 10Hz~1MHz High-Frequency LCR Meter 10Hz~1MHz
GW Instek (Good Will Instruments)
GW-LCR-8201

Price on request
DC Electronic Load | 80 V, 50 A, 250 W DC Electronic Load | 80 V, 50 A, 250 W
GW Instek (Good Will Instruments)
GW-PEL-503-80-50

Content 1 piece(s)
€1,024.00 *
High Power Compact DC Load | 6000 W, 600 A, 150 V High Power Compact DC Load | 6000 W, 600 A, 150 V
GW Instek (Good Will Instruments)
GW-PEL-5006C-150-600

Price on request
Safety Analyser | 500 VA AC/DC Safety Analyser | 500 VA AC/DC
GW Instek (Good Will Instruments)
GW-GPT-15002

€2,618.00 *
Multifunction HV Tester | H, L or X Status Multifunction HV Tester | H, L or X Status
GW Instek (Good Will Instruments)
GW-GPT-9513

€2,261.00 *
Digital Power Meter Digital Power Meter
GW Instek (Good Will Instruments)
GW-GPM-8310-DA4

Content 1 piece(s)
€1,450.00 *
Digital Power Meter Digital Power Meter
GW Instek (Good Will Instruments)
GW-GPM-8310

Content 1 piece(s)
€1,147.50 * €1,350.00 *
Test Fixture for SMD/Chip components Test Fixture for SMD/Chip components
GW Instek (Good Will Instruments)
GW-LCR-15A

€956.00 *
Test Fixture for Bottom Electrode components Test Fixture for Bottom Electrode components
GW Instek (Good Will Instruments)
GW-LCR-10A

€1,722.00 *
Test Fixture for axial & radial leaded components Test Fixture for axial & radial leaded components
GW Instek (Good Will Instruments)
GW-LCR-05A

€910.00 *
Oscilloscope Accessories | Current Clamp, 200A Oscilloscope Accessories | Current Clamp, 200A
GW Instek (Good Will Instruments)
GW-GCP-300

Content 1 piece(s)
€600.00 *
Electronic load | DC, 5250 W, 800 V, 262.5 A Electronic load | DC, 5250 W, 800 V, 262.5 A
GW Instek (Good Will Instruments)
GW-PEL-3533H

Price on request
Viewed