- Order number: IH-IT8902E-150-200
ITECH IT8902E-150-200
Electronic DC load with high power density
Power: 2000 W, Voltage: 150 V, Current: 200 A, 4 U
IT8900A/E series high performance high power DC electronic load provides three voltage ranges 150 V/600 V/1200 V, stand-alone power from 2 kW to 54 kW. IT8900A/E series, with ultra-wide voltage and current range, controlled by an independent master unit. The power expands to 600kW by master-slave paralleling. Ultra-high power density, 6 kW is with only 4U height. IT8900A/E series has eight (A series) / four (E series) working modes, faster loop response and current rising and falling speed, as well as dynamic mode, OCP test, OPP test, automatic test and battery test functions. Built-in CAN, LAN, GPIB, USB, RS232 and analog interfaces, etc., IT8900A/E series has full protection function, which can be applied to power battery discharge, DC charging station, on-board charger (OBC), power electronics and other power electronics products.
- Power: 0 - 600 kW
- Voltage: 0 - 1200 V
- Current: 0 - 2400 A
- Size: 4 - 37 U
Functions of the DC Electronic Load of Itech IT8902E-150-200
- Power: 2000 W
- Voltage: 150 V
- Current: 200 A
- Size: 4 U
- master/slave parallelling
- A-Serie: 8 working modes, E- Serie 4 working modes
- Soft start and soft stop prevent voltage fluctuations at on/off
- High-precision voltage and current measurement
- 500kHz high-speed voltage and current sampling rate
- Protection functions: OVP, OCP, OPP, OTP, current oscillation protection, limited current protection, limited power protection, reverse alarm protection etc
- Built-in LAN, USB, RS232, GPIB, CAN, external analog control interface
- Transient over-power loading capability
- Adjustable CV loop speed, match different power supplies
- Short circuit simulation, automatic test function
Application of the DC Electronic Load of Itech IH-IT8902E-150-200
- Battery-Charge and Discharge
- Solar and wind turbine test
- Test of fuel cells
- Test of power electronics
- Safety test for large capacities
- E-Mobility aging tests
AC / DC: | DC |
Output Channels: | 1 |
Voltage (V): | 150 V |
Power (W): | 2000 W |
Current (A): | 200 A |
Regulations Operating Modes: | CV - constant voltage, CC - constant current, CP - constant power, CR - constant resistance |
Interfaces: | Analog, GPIB, LAN, RS232 / Serial, USB |
Produktserie: | IT8900A/E |