Store for professionals (EU countries)
Give us a call: +49 (0) 7032-895 93 - 3

Vector Network Analyzers

When it comes to network analyzers, vector network analyzers today are state-of-the-art. Classic areas of application are found in communications and high-frequency engineering.
Network analysers are used to measure scattering parameters at electrical ports of components by means of a VNA (vector network analysis). For this purpose, the analyser emits a test signal with defined phase, frequency and amplitude, which is reflected by the electrical components. At the same time, the analyser analyses the reflected signals and determines the transmission and reflection values of the measured active or passive components. This results in their transmission properties.

When it comes to network analyzers, vector network analyzers today are state-of-the-art. Classic areas of application are found in communications and high-frequency engineering. Network... read more »
Close window
Vector Network Analyzers

When it comes to network analyzers, vector network analyzers today are state-of-the-art. Classic areas of application are found in communications and high-frequency engineering.
Network analysers are used to measure scattering parameters at electrical ports of components by means of a VNA (vector network analysis). For this purpose, the analyser emits a test signal with defined phase, frequency and amplitude, which is reflected by the electrical components. At the same time, the analyser analyses the reflected signals and determines the transmission and reflection values of the measured active or passive components. This results in their transmission properties.

Close filters
  •  
  •  
  •  
1 From 3
No results were found for the filter!
Electronic fuse | 200 V, 10 A Electronic fuse | 200 V, 10 A
bsw TestSystems & Consulting
AL-EFUSE2-200-10

Electronic fuse for on-wafer test, protection for wafer probes, bias tees, connectors and the transistors
Content 1 piece(s)
€2,100.00 * €2,310.00 *
Cable assemblies | 88.2 mm Cable assemblies | 88.2 mm
bsw TestSystems & Consulting
BSW-SRCONF-141SMAMM-03.0

Semi-rigid/manual cable assemblies with a length of 88.2 mm, 0 ~ 18 GHz, 50 Ohm
Content 1 piece(s)
€17.25 *
Cable assemblies | 107.6 mm Cable assemblies | 107.6 mm
bsw TestSystems & Consulting
BSW-SRCONF-141SMAMM-04.0

Semi-rigid/manual cable assemblies with a length of 107.6 mm, 0 ~ 18 GHz, 50 Ohm
Content 1 piece(s)
€17.25 *
Cable assemblies | 133 mm Cable assemblies | 133 mm
bsw TestSystems & Consulting
BSW-SRCONF-141SMAMM-05.0

Semi-rigid/manually assembled cable assemblies with a length of 133 mm, 0 ~ 18 GHz, 50 Ohm
Content 1 piece(s)
€17.25 *
Cable assemblies | 158.4 mm Cable assemblies | 158.4 mm
bsw TestSystems & Consulting
BSW-SRCONF-141SMAMM-06.0

Semi-rigid/manually assembled cable assemblies with a length of 158.4 mm, 0 ~ 18 GHz, 50 Ohm
Content 1 piece(s)
€18.50 *
Cable assemblies | 183.8 mm Cable assemblies | 183.8 mm
bsw TestSystems & Consulting
BSW-SRCONF-141SMAMM-07.0

Semi-rigid/manually assembled cable assemblies with a length of 183.8 mm, 0 ~ 18 GHz, 50 Ohm
Content 1 piece(s)
€18.50 *
Cable assemblies | 209.2 mm Cable assemblies | 209.2 mm
bsw TestSystems & Consulting
BSW-SRCONF-141SMAMM-08.0

Semi-rigid/manually assembled cable assemblies with a length of 209.2 mm, 0 ~ 18 GHz, 50 Ohm
Content 1 piece(s)
€18.50 *
Cable assemblies | 235.0 mm Cable assemblies | 235.0 mm
bsw TestSystems & Consulting
BSW-SRCONF-141SMAMM-09.0

Semi-rigid/manually assembled cable assemblies with a length of 235 mm, 0 ~ 18 GHz, 50 Ohm
Content 1 piece(s)
€18.50 *
Cable assemblies | 260.0 mm Cable assemblies | 260.0 mm
bsw TestSystems & Consulting
BSW-SRCONF-141SMAMM-10.0

Semi-rigid/manually assembled cable assemblies with a length of 260 mm, 0 ~ 18 GHz, 50 Ohm
Content 1 piece(s)
€18.50 *
Cable assemblies | 286.0 mm Cable assemblies | 286.0 mm
bsw TestSystems & Consulting
BSW-SRCONF-141SMAMM-11.0

Semi-rigid/manually assembled cable assemblies with a length of 286 mm, 0 ~ 18 GHz, 50 Ohm
Content 1 piece(s)
€19.77 *
Cable assemblies | 310.8 mm Cable assemblies | 310.8 mm
bsw TestSystems & Consulting
BSW-SRCONF-141SMAMM-12.0

Semi-rigid/manually assembled cable assemblies with a length of 310.8 mm, 0 ~ 18 GHz, 50 Ohm
Content 1 piece(s)
€19.77 *
Cable assemblies | 336.0 mm Cable assemblies | 336.0 mm
bsw TestSystems & Consulting
BSW-SRCONF-141SMAMM-13.0

Semi-rigid/manually assembled cable assemblies with a length of 336 mm, 0 ~ 18 GHz, 50 Ohm
Content 1 piece(s)
€19.77 *
1 From 3

Do you still need a suitable instrument to determine the transmisson properties of your components?

Choose the right instrument from our selection of high-performance RF vector analysers with maximum frequencies from 3 GHz to 67 GHz and even up to 325 GHz using expansion modules.
We offer both mechanical and electronic calibrations as well as multi-window and multiple measurement displays. The wide dynamic ranges and low noise levels are suitable for a wide range of applications, including RF design, manufacturing, service and training.

Already have the right accessories?

Add a high-quality RF cable in a variety of lengths to your network analyser. We are proven specialists, especially in the accessories area of RF cables, as the bsw TestSystems & Consulting from our family of companies specialises in RF measurement technology. With the right professional equipment, nothing stands in the way of your measurements!

Viewed