Programmable High Precision DC Source Measure Unit
- Order number: GW-GSM-20H10
GW Instek GSM-20H10
Precision Source Measure Unit, DC Source
GW Instek GSM-20H10 is a precision source measure unit that provides highly stable DC power and instrument-grade 6½-digit multimeter measurements. While operating, it can be used as a voltage source, current source, voltmeter, ammeter, and ohmmeter, which is uniquely ideal for the evaluation of component characteristics and the test applications of production, including nanomaterials and components, semiconductor architecture, organic materials, high-efficiency illumination, passive components and material characteristics analysis, etc.
GSM-20H10 provides four-quadrant operation of ±210V/±1.05A/22W. The first and third quadrants operate as power supplies to supply power to the load. The second and fourth quadrants function as loads to consume power internally. Voltage value, current value and resistance value can be measured while operating the power supply or load function with an accuracy of 0.012% and a resolution of 1μV/10pA/10μΩ.
With respect to sampling rate, GSM-20H10 supports a sampling rate of up to 50k points/second, which can accurately analyze the characteristics of the DUT. With the large 4.3-inch screen, all measurement settings, parameters and results can be completely displayed on the screen. The SDM (Source Delay Measure) function is provided to delay sampling when the signal changes so as to prevent the unstable signal from being captured and cause misjudgment. There are four built-in sequence output modes (Stair, Log, SRC-MEM, Custom), which can support up to 2500 points of sequence variation output.
Pertaining to protection, GSM-20H10 provides OVP/OTP modes. The design of OVP allows users to self-define the range of OVP. OTP can effectively prevent errors caused by temperature drift during the test process. For interfaces, this product supports standard SCPI commands and provides RS-232, USBTMC, LAN, GPIB (optional) interfaces to meet users’ different interface needs.
Specifications of the Precision Source Measure Unit GSM-20H10:
- Maximum Output ±210 V / ±1.05 A / 22 W
- Built-in 4 Sequence Output Modes (Stair, Log, SRC-MEM, Custom), up to 2500 Points
- OVP / OTP Protection Function
- 0.012 % Basic Measure Accuracy with 6 1/2-digit Resolution
- Variable Sampling Speed
- SDM (Source Delay Measure) Cycle
- 2-, 4- and 6-wire Remote V-source and Measure Sensing
- Variable Display Digits
- Built-in Limit Function
- Built-in 5 Calculation Functions
- 4.3" TFT LCD, Digital Number Keyboard
- Built-in RTC Clock
- Interface: RS-232, USBTMC, LAN, GPIB (Optional)
Options & Accessoiries of the Precision Source Measure Unit GSM-20H10:
| Model | Description |
| SM-01 | Digital I/O Adapter, Convert DB15 to DB9 + 8-pin micro-DIN |
| SM-02 | Digital I/O Adapter, Convert DB15 to DB37 + 8-pin micro-DIN |
| GTL-246 | USB Cable (USB 2.0 A-B Type, approx.. 1200mm) |
| GTL-258 | GPIB Cable (25 pin Micro-D Connector) |
Scope of delivery of the Precision Source Measure Unit GSM-20H10
- 1 x GSM-20H10
- 2 x Alligator Clip
- 1 x user manual (+CD)
- 1 x GTL-207A test lead
Precision Source Measure Unit GSM-20H10 product video:
- Do you have any questions concerning this product?
- Further products by GW Instek (Good Will Instruments)
Founded in 1975, Good Will Instrument Co., Ltd was the first professional manufacturer in Taiwan specializing in electrical test & measurement instruments. GW Instek began as a manufacturer of power supplies and quickly expanded into the development of high precision electronic test and measurement instruments.
After decades of experience in the test and measurement industry, GW Instek has grown to become one of the important manufacturers and developers of test and measurement instruments worldwide. Today GW Instek has more than 300 product items, ranging from oscilloscopes, spectrum analyzers, signal sources, basic test & measurement instruments to video surveillance systems. GW Instek has also seen its present growth internationally. With headquarters located in Taipei, Taiwan, GW Instek has subsidiaries in mainland China, America, Japan, Korea, Malaysia, Europe, and India; its products are sold to more than 80 countries worldwide.
With a strong focus on high quality, economical measurement solutions for the educational and industrial manufacturing markets, Good Will Instrument has developed a solid brand image and reputation for reliability, integrity and innovation. From its inception, GW Instek has dedicated itself to becoming a professional electronic test and measurement designer and manufacturer, resulting in a number of national awards and the trust of customers world-wide; In 1993 Good Will Instrument became ISO 9002 accredited and the following year won the Highest Honor of National Outstanding SMEs (small and medium enterprises) Award from the Taiwanese Ministry of Economic Affairs. In 2000, Good Will Instrument went public on the Taiwan Stock Exchange.
GW Instek has been a byword for quality electronic test & measurement instruments due to its decades of experience in R&D, marketing and manufacturing. GW Instek's reputation has been built upon the philosophy of integrity, quality, and creativity as well as the accumulation of years of experience. Focusing on the improvement of R&D, manufacturing and marketing competitiveness, GW Instek will continue to be one of the most reliable, trusted brands creating the highest value for customers.
GW-PEL-2000B-Serie
KW-S7000-H-Serie
GW-PSB-2000-Serie
GW-PEL-3000-3000H-Serie
GW-GSP-9300B
GW-GSP-730
GW-GPE-4323
KW-S7000-L-Serie
KW-E5000-Serie
GW-GPS-x303-Serie
GW-GPS-Serie
GW-GPR-M-Serie
GW-GPR-H-Serie
GW-ASR-2000-Serie
GW-PEL-500-Serie
GW-PEL-5000C-Serie
GW-PEL-3000E-Serie
GW-LCR-6000-Serie
GW-GPT-12000-Serie
MPE-TS-Serie
GW-GPP-Serie
GW-GDM-9061
GW-GSP-818
GW-PSS-3203
GW-GSP-9300BTG
GW-PFR-100MGP
GW-PFR-100M
GW-PFR-100LGP
GW-PFR-100L