Store for professionals (EU countries)
Give us a call: +49 (0) 7032-895 93 - 0

Regenerative DC Power System| 800 W, 30 A, 60 V

Price on request

Prices plus VAT plus shipping costs

The article is available.

  • IH-IT-M3632
Available downloads:
ITECH IT-M3632 Bidirectional DC power supply and regenerative load Regenerative, Form factor... more
Product information "Regenerative DC Power System| 800 W, 30 A, 60 V"

ITECH IT-M3632
Bidirectional DC power supply and regenerative load
Regenerative, Form factor half 19 inch, 1U, parallel up to 16 x 16 devices
Power: 800 W, Voltage: 60 V, Current: 30 A, 1/2 19'' & 1 U

IT-M3600 regenerative power system integrates two instruments in one, which is a bidirectional power supply and a regenerative electronic load. When used as a load, its energy recovery function can convert the absorbed DC power into AC power and return it to the grid. When used as a power supply, it can also be used as a wide range bidirectional DC power supply. IT-M3600 combines the advantages of both instruments well, and its small size of only 1U half rack also help to save your space, time and cost. IT-M3600 with high-precision output and measurement, it is suitable for multiple test fields such as multi-module batteries, multi-channel power supplies, micro inverters, and semiconductor devices.

  • Power: 0 - 800 W
  • Voltage: 0 - 600 V
  • Current: 0 - 30 A
  • Size: 1/2 19'' & 1 U

Functions of the bidirectional regenerative DC Power System IT-M3632

  • Power: 800 W
  • Voltage: 60 V
  • Current: 30 A
  • Size: 1/2 19'' & 1 U
  • One button switch between source and load
  • Bidirectional energy flow between DUT and grid
  • High efficient power regeneration
  • 8 operating modes: CC/C V/CP/CR/C V+CC/CC+CR/C V+CR/C V+CC+CP+CR
  • Independent control of multi-channels.implement synchronization or proportional tracking
  • Parallel up to 16 x 16 units
  • High-speed measurement, keep 10 times / s update rate even connecting 16 stand-alone units
  • Programmable voltage and current rise and fall time
  • Temperature measurement function,over temperature protection List
  • Various protection such as ±OCP, ±OVP, OPP, over heat protection, grid fault protection and fault storage, foldback, Power-off protection, sense abnormal protection
  • Automatic detection of power grid state to realize reliable grid connection
  • Precharge function to prevent overshoot of DC loading current
  • Anti-reverse protection function through optional accessories
  • Five optional cards, supporting RS232, CAN, LAN, GPIB, USB_T-MC, USB_VCP, RS485, analog and IO communication

Application of the bidirectional regenerative DC Power System IH-IT-M3632

  • Batteries (Test of multi-module-batteries, charge and discharge)
  • Battery simulation
  • Multichannel-power supplies
  • Microinverter -and Semiconductor Test (aging)
  • PV Inverter Test (I-V curve simulation)
AC / DC: DC
Output Channels: 1
Voltage (V): 60 V
Power (W): 800 W
Current (A): 30 A
Regulations Operating Modes: CV - constant voltage, CC - constant current, CP - constant power, CR - constant resistance
Interfaces: Digital I/O (Opt.), Analog (Opt.), CAN (Opt.), GPIB (Opt.), LAN (Opt.), RS232 / Serial (Opt.), RS485 (Opt.), USB (Opt.)
Produktserie: M3600
Related links to "Regenerative DC Power System| 800 W, 30 A, 60 V"
High power supply | AC, DC High power supply | AC, DC
ITECH
IH-IT7800

Price on request
LX-Signal Light- HV1 | for Hipot Tester LX-Signal Light- HV1 | for Hipot Tester
LXinstruments GmbH
LX-Signalleuchte-HV1

Price on request
Hand LCR-Meter | 4 1/2 Digits, 100 kHz Hand LCR-Meter | 4 1/2 Digits, 100 kHz
GW Instek (Good Will Instruments)
GW-LCR-916

Content 1 piece(s)
€334.00 *
Viewed