Store for professionals (EU countries)
Give us a call: +49 (0) 7032-895 93 - 3

VI source | isolated, dual-range

VI source | isolated, dual-range
Price on request

Prices plus VAT plus shipping costs

The article is available.

  • OTP2-Modul-Nr188
LXinstruments GmbH OTP2 module no188 VI source / Keysight Insulated voltage source, insulated... more
Product information "VI source | isolated, dual-range"

LXinstruments GmbH OTP2 module no188
VI source / Keysight
Insulated voltage source, insulated current source with programmable voltage limit, 16 V range at 200 mA

Properties of VI source M9186A

  • 16 V range at 200 mA for high voltage/current requirements
  • Highly accurate current measurement for leakage testing
  • Insulated voltage source
  • Insulated current source with programmable voltage limit
  • Interlock function for safety and protection
  • Low range: ±16V @ 200mA
  • High range: -10V to 100V up to 20mA

The M9186A VI source from Keysight

With the V/I source, you can inject a voltage and measure the resulting current or inject a current and measure the resulting voltage. It consists of two separate amplifiers, called "low" and "high", which have a common output terminal. The "low" amplifier provides voltages in the range of 16 volts at up to 200 mA and the "high" amplifier provides voltages in the range of 100 V at up to 20 mA.

Typical applications for the low voltage amplifier include parametric leakage at I/O pins, bias current, impedance, threshold and clamp voltage. The high voltage amplifier can be used to check for the presence of clamping diodes on the outputs of modules driving inductive loads. Both amplifiers can measure the amount of current flowing while forcing a constant voltage.

Uniquely, a safety interlock for the high voltage amplifier automatically disables the high voltage amplifier and opens all relays if the interlock circuit is broken. This provides protection for the monitoring system when dangerous high voltages may be present. Interlocking is indicated by an LED on the front of the module and can be used, for example, by connecting to an external limit switch on fixtures.

LXinstruments GmbH was founded in 2006 as a solution provider for all issues relating to instruments and systems in electronic measurement technology. Our systems are mainly based on the LXI standard (Lan based Extensions for Instrumentation), an open industry standard. The portfolio was gradually expanded to include the sale of electronic test & measurement instruments and components and products developed in-house.

Our sister company, bsw TestSystems & Consulting, was integrated into the company in 2009. With its specialisation in RF solutions, it primarily supports the semiconductor and telecommunications industry as well as university and research institutions.

High power AC/DC electronic load | 2800 W, 28 A, 350 V High power AC/DC electronic load | 2800 W, 28...
GW Instek (Good Will Instruments)
GW-AEL-5003-350-28

Price on request
Three-phase PDU | 63 A, emergency stop Three-phase PDU | 63 A, emergency stop
LXinstruments GmbH
LX-PDU-03-63A-NA

Content 1 piece(s)
€3,795.00 *
Viewed